![DC High Voltage Test Set - Continuous Type](/images/303070f4a6e9f9f21d12df6c0c3f2d7c_S.jpg)
DC High Voltage Test Set - Continuous Type
This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification.
![DC High Voltage Test Set - Stationary](/images/DC-HV-220_Ss.jpg)
DC High Voltage Test Set - Stationary
This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification.
![DC High Voltage Test Set - Portable (Hipot)](/images/DC-HV-90_S.jpg)
DC High Voltage Test Set - Portable (Hipot)
Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage.
![Primary Current Injection Test Set.](/images/PCITS-3.1_Ss.jpg)
Primary Current Injection Test Set.
Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc.
![Inductive Load](/images/inductiveload1_S.jpg)
Inductive Load
RE’ 6kVA Inductive Load designed to testing single phase Meter Power Supply etc.
![Secondary Current Injection Test Set](/images/SCITS-1.1_Ss.jpg)
Secondary Current Injection Test Set
Secondary Injection Test Sets have been designed keeping in view the requirements of field and laboratory.
![Battery Discharge Set](/images/inductiveload1_S.jpg)
![Pre Heater](/images/preheater_S.jpg)
![Static / Electromechanical Meter Test Bench](/images/metertestbench_S.jpg)
![Contact Resistance Meter](/images/contactresistancemeter_S.jpg)
Contact Resistance Meter
Contact resistance micro-ohm meter model RE-CR-100 is capable to measure resistance between 0.1 micro ohm to 20 milli ohm.
![Million Mega Ohm Meter](/images/million_mega_ohm_meter_S.jpg)
Million Mega Ohm Meter
Million mega ohm Meters are designed for measurement of insulation resistance of insulating materials, Electrical & Electronic Components, Cables, Panels, Transformers, chokes, PCB's, Plugs & Sockets and many similar products.
![Transformer Test Bench](/images/transformertestbench_S.jpg)
Transformer Test Bench
‘RE’ Electrical Test Bench for Testing Motors, transformers and electrical Equipment etc.
![Winding Resistance Meter](/images/winding_resistance_meter_S.jpg)
Winding Resistance Meter
The ‘RE’ High Current Resistance Meter delivers high performance where it counts. With unmatched speed, range and accuracy it is the best solution for low resistance measurements on transformers, motors, breakers, switchgear, etc
![Oil Di-Electric Test Set](/images/AOTS_s.jpg)
Oil Di-Electric Test Set
A transformer Oil Breakdown Test Set is an equipment that measures the Di-electric Strength of the oil.
![Phantom Load](/images/RE_LOGO_IMG.jpg)
Phantom Load
Phantom Loading Bench suitable for 3 phase 4 wire, 3 phase 3 wire and single phase Meters with Electronics and Electro-mechanical type
![Tracking Index](/images/Tracking-Index_S.jpg)
![Milli Volt Drop Test Set](/images/milvoltdroptestset_S.jpg)
![Phase Shifting](/images/RE_LOGO_IMG.jpg)
![Kilo Volt Meters / Voltage Dividers](/images/dividers_S.jpg)
![Sphere Gaps](/images/sphere-gap_S.jpg)
![Non Inductive Load](/images/noninductive_bank_S.jpg)
![Voltage Dips and interruption Test Set](/images/voltage_Dips1_S.jpg)
Voltage Dips and interruption Test Set
The input supply is expected to change time to time. So the voltage dip and interruption test set is subjected on energy meter
![Variable Auto Transformers](/images/Variable-Auto-Transformer-1_S.jpg)
Variable Auto Transformers
Wherever voltage control is required, ‘RE’ Variacs makes it very simple by providing Toroidally wound Auto Transformer for variable voltage.
![Inductive Load Test Set](/images/inductiveload1_S.jpg)
Inductive Load Test Set
RE’ 6kVA Inductive Load designed to testing single phase Meter Power Supply etc.
![Micro Ohm Meter](/images/micro-ohm-meter1_S.jpg)
Micro Ohm Meter
‘RE’ Micro-ohm Meter 1 amps capacity 3.5 digit suitable to checking low resistance of copper wires and other conductors
![Short Time Over Current Test Set](/images/short_time_current_test_set_S.jpg)
Short Time Over Current Test Set
The equipment is designed for supply high current for pre-set duration.
![Winding Resistance Meter](/images/winding_resistance_meter_S.jpg)
Winding Resistance Meter
The ‘RE’ High Current Resistance Meter with its unmatched speed, range and accuracy
![Heat Cycle Test](/images/heatcycletestset_S.jpg)
Heat Cycle Test
Heat Cycle Test Set is designed for working on 400 V, 2 phases of 3 phase AC supply.
![Magnetizing Coil](/images/magnetisingcoil_S.jpg)
Magnetizing Coil
A.C. Magnetic Coil design for working on 400V, 50 HZ AC supply capable to induce 28000 Amp turns for testing the magnetic influence on Energy Meter
![Micro-ohm Meter 10 Amps](/images/digitalmicroohmmeter_S.jpg)
Micro-ohm Meter 10 Amps
‘RE’ Micro-ohm Meter 10 amps capacity 3.5 digit suitable to checking low resistance of copper wires and other conductors